Remote a PC

  A computer victim IP address:

So if hackers want getting the IP Address of your computer what they do just simply chatting with you on Skype, Hotmail  and Gmail and as well chat room.so they just do follow some step like below

1    .     They just do open the Cmd promt (open from run and then write cmd)

2    .     Now then they type netstat –n (its mean that the recently some IP address                        connected  with your computer )

3    .     After that they can chat with you and now after some chatting.

4    .     Just again type the netstat –n (so there is new IP located )

HOST ALIVE OR NOT:

Like I found the 192.168.0.102 now just after that they can check that the IP address is open or not mean (online it is reply)

Ping 192.168.0.102

Scan the open ports:

So if the IP is online so now check the ports .so now you download the advance port scanner . if you have nmap, zenmap or backtrack so its better.

 

Check the Venerable ports and access:

No finally hacker the IP and open ports address so then finally with the telnet command they access in window and Make sure that you have enabled in the computer. If you don’t know just go to control panel > program (add or remove) > add window components > click on the telnet. So now open the command and type like that telnet

telnet (IP Address ) (port number)

telnet 192.168.0.102 23

                                             
now they After that you will asked to input the login information like below

Enjoy the services of Telnet

How to START Telnet services in windows????????

Telnet is a common way to remotely control Web servers.Telnet is a user command and an underlyingTCP/IP protocol for accessing remote computers. Through Telnet, an administrator or another user can access someone else’s computer remotely. On the Web, HTTP

The Telnet program runs on your computer and connects your PC to a server on the network. You can then enter commands through the Telnet program and they will be executed as if you were entering them directly on the server console. This enables you to control the server and communicate with other servers on the network. To start a Telnet session, you must log in to a server by entering a valid username and password.
Open control panel.

Then go into programs. Click on  ‘turn windows features on or off ‘ .

It will open a dialog box, just check the Telnet Client option and hit the OK button.

Now open run Dialog box type services.msc

Locate the “Telnet” service, right-click on it and select Properties

In the Startup Type drop down menu, select “Automatic” instead of “Disabled”.Click on Apply button.       

Right-click on the “Telnet” service again, but this time select Start option on right-click context menu. Telnet Server service should be running after this.

Click ok